کانکتور روسی سری(RG) РГ پارت نامبر РГ6КП-2Г2ТГ1Т

برای قیمت تماس بگیرید

РГ6КП-2Г2ТГ1Т

Operating conditions of connector RG2KP (2G2T, G1T)-V:
1. Vibration:
– frequency range, Hz – from 1 to 2000;
– acceleration, m/s 2 (g) – 300 (30).
2. Single blows:
– acceleration, m/s 2 (g) – 1500 (150).
3. Multiple impacts:
– acceleration, m/s 2 (g) – 1500 (150).
4. Linear shocks:
– acceleration, m/s 2 (g) – 1000 (100).
5. Ambient temperature, C – from -60 to +70.
6. Atmospheric reduced working pressure, Pa (mm Hg) – 0.4 10 3 (3.0)

Specifications of connector RG2KP (2G2T, G1T)-V:
Electrical contact resistance, no more than, mOhm:
– LF contacts:
– 1.0 – 5.0;
– 1.5 – 2.5;
– 2.5 – 1.0;
– 3.5 – 0.75;
– RF contacts – 10.
Insulation resistance at maximum operating voltage, not less than:
– up to 500 V – 5000;
– over 500 V – 10000.
Minimum operating time, hours – 1000.
Number of joints-dismemberments – 500.
Minimum shelf life, years:
– without high-voltage standard blocks – 15;
– with high-voltage standard blocks – 8.

جهت اطلاع از موجودی و قیمت تماس بگیرید.

09141284880

توضیحات
نظرات (0)

rectangular RG connectors designed to work in electrical current circuits. Connectors electric rectangular type-setting combined cutting or self-locking. They are used for connecting and disconnecting low-frequency, radio-frequency and high-voltage electrical circuits of electrical and radio equipment. The design of the connectors allows you to combine the contact set and get low-frequency, radio-frequency and high-voltage contacts in one connector.
The connectors consist of two parts: a type-setting plug (RSh) or a type-setting socket (RG).
Plugs and sockets are made without a casing, with a straight casing, with an angled casing.
To prevent self-dismemberment of cable, instrumental and block parts, the connectors are equipped with latches.
Block parts of the connectors have a “floating” device to ensure self-orientation when they are installed on removable blocks of equipment.
The contact plating is silver. Mounting method – soldering.
The articulation and dismemberment of the connectors must be carried out in the absence of current through their contacts. Resistant to sea fog, mold fungi, frost, dew and solar radiation. RG type connectors are intended for internal installation and are manufactured in all-climatic version “B”.
Quality category: “OTK”, “VP”.
Specifications: – OST V 11 0121-91, – OYU0.364.008TU, – NShch0.364.008TU.

Symbol structure: RG6KP-2G2TG1T( РГ6КП-2Г2ТГ1Т)
R – low-frequency rectangular connector for indoor installation;
D – part of the connector:
W – pin contact (plug) for printed wiring,
G – socket contact (socket) for volumetric mounting;
6 – conditional frame size (1, 2, 3, 4, 5, 6, 7, 9, 11);
KP – a constructive version of the case:
P – instrument without a casing (plug),
PKP – instrument-cable with a straight casing (plug),
PKU – instrument-cable with an angled casing (plug),
KP – cable with a straight casing (socket),
KU – cable with an angular casing (socket),
B – block without a casing (plug, socket),
BKP – block with a straight casing (socket),
BKU – block with an angular casing (socket);
* In the symbol of housings of block plugs without casings, intended for articulation only with a block socket without a casing and a socket without a casing and locks, the designation of the structural version of the housing does not contain a symbol of typical sockets typed into the housing.

2G2T – The structure of the symbol for typical blocks typed into the body:
2 – the number of blocks typed in a row of a given name, without a number – one typed block of a given name;
G – type of contact of standard blocks typed into the housing: W – plug, G – socket, P – without contacts (empty);
2 – the number of the combination of contacts for the plug and socket: 1,2,3,4,5. In empty pads, contact combination number: 1 – single; 2 – double; 3 – triple.
T – typical pads with increased heat resistance.

G1T – The structure of the symbol for typical blocks typed into the body:
x – the number of blocks typed in a row of a given name, without a number – one typed block of a given name;
G – type of contact of standard blocks typed into the housing: W – plug, G – socket, P – without contacts (empty);
1 – the number of the combination of contacts for the plug and socket: 1,2,3,4,5. In empty pads, contact combination number: 1 – single; 2 – double; 3 – triple.
T – typical pads with increased heat resistance.

B – all-climatic version.