کانکتور روسی کتابی 32 پین | سری (RP)РП

برای قیمت تماس بگیرید

Technical parameters of RP15 connectors:
Total number of contacts: 9, 10, 14, 15, 23, 32, 36, 50
Contact resistance, no more than, MOhm:
– low-frequency contacts: 5

– high-frequency contacts: 10

Operating current per contact, A: 5
Maximum operating voltage, V
– low-frequency contacts:400
– high-frequency contacts:100

resistance in normal climatic conditions, not less than, MOhm:
– low-frequency contacts:5000
– high-frequency contacts:1000

Sinusoidal vibration:
– frequency range, Hz:1….5000
– acceleration, m/s 2 (g):500 (50)

Mechanical shock, single

action, m/s^2 (g): 10000 (1000)
Mechanical shock, repeated action, m/s^2 (g): 1500 (150)
Operating ambient temperature, °C: -60 to +125
Increased relative air humidity at a temperature of +40°C, %: 98
Atmospheric reduced operating pressure, Pa (mm Hg): 1.34×10 -9 (10 -12 )
Minimum operating time, h

ours: 10000
Number of joints: 500

DATASHEET RP-15 CONNECTOR

برای قیمت و موجودی تماس بگیرید.

دسته: کانکتور مستطیلی روسی برچسب: کانکتور مستطیلی

توضیحات
نظرات (0)

РП15-32ШК

Electric low-frequency and radio-frequency rectangular small-sized combined connectors РП15-32ШК for volumetric installation.
They are used to connect and disconnect low-frequency and radio-frequency electrical circuits in special-purpose electronic equipment.
Designed to operate in low-frequency electrical circuits of direct current, alternating and pulsed currents at voltages up to 400 V and in high-frequency circuits with frequencies up to 10 GHz at voltages up to 100 V. Push-in connectors consist of an appliance plug and an appliance socket.
Screw-lock connectors – from cable plug and appliance socket.

Explanation of the symbol:

РП15 – connector type;
32 – number of n.p. contacts;
Ш – part of the connector: Ш – plug, Г – socket;
B – contact coating: B – silver, A – gold;
Ф – presence of a latch (for a socket);
K – the presence of a casing (for the plug);
B – all-climate design.

РП15-32ГФ

РП15-32ГФ electrical low-frequency and radio-frequency rectangular small-sized combined connectors for volumetric installation.
They are used to connect and disconnect low-frequency and radio-frequency electrical circuits in special-purpose electronic equipment.
Designed to operate in low-frequency electrical circuits of direct current, alternating and pulsed currents at voltages up to 400 V and in high-frequency circuits with frequencies up to 10 GHz at voltages up to 100 V. Push-in connectors consist of an appliance plug and an appliance socket.
Screw-lock connectors – from cable plug and appliance socket.
Plugs may have a casing, sockets – a lock.
Cable plugs are manufactured with a stamped metal casing, instrument sockets are made without a casing with a screw lock.
Depending on the contact arrangement, connectors are manufactured in 10 standard sizes.
The coating of low-frequency contacts of connectors is silver or gold, high-frequency contacts are coated with silver.

Explanation of the symbol:

10 – number of n.p. contacts;
Г – part of the connector: W – plug, G – socket;
B – contact coating: B – silver, A – gold;
Ф – presence of a latch (for a socket);
K – the presence of a casing (for the plug);
B – all-climate design.