کانکتور روسی سری (RSHA)РША پارت نامبر РШАВПБ-6

برای قیمت تماس بگیرید

Technical parameters of (РША) connectors:
Total number of contacts:…….. 6, 8, 10, 14, 20
Contact resistance, no more than, Ohm:……. 0.01
Operating current per contact, A: ……6
Maximum operating voltage, V: ………600
Insulation resistance in normal climatic conditions, not less than, GΩ:……. ten
Sinusoidal vibration:
– frequency range, Hz:5….200
– acceleration, m/s 2 (g):……100 (10)
Mechanical impact, single action with acceleration, m/s^2 (g):…….. 1500 (150)
Mechanical impact, multiple action with acceleration, m/s^2 (g): 1500 (150)
Ambient operating temperature, °C: …….-60 to +85
Increased relative humidity at 40°C, %:……. 98
Minimum operating time, hours: ……..5000
Number of articulations-dismemberments:………. 1000

РШАВПБ-6 CONNECTOR DATASHEET DOWNLOAD

جهت اطلاع از موجودی و قیمت تماس بگیرید.

09141284880

توضیحات
نظرات (0)

(РШАВПБ-6) RSHAVPB-6 electric low-frequency rectangular connectors of normal dimensions for internal or external installation.
Designed for operation in electrical circuits of direct, alternating frequency up to 3 MHz and pulsed current with voltage up to 600 V.
They are used for connecting and disconnecting electrical circuits in radio-electronic equipment for special and general purposes.
The connectors consist of pin RSHAG (plug) and female RSHAG (socket) parts with their installation in housings and without housings.
Connectors without housing are designed for indoor installation, in housing version – for outdoor installation.
To prevent self-dismemberment of the connectors installed in the housings, locks-brackets are provided that fix the articulated position of the connector parts.
The housings have terminals for fixing the wiring harness, located in the direction of the articulation of the connector parts, as well as at an angle and in the lateral direction, the terminals are equipped with bushings for directly fixing the wiring harness.
Connectors with cable (except through-through) housings are made in dust-splash-proof (with sealing gasket) housings and are completed with metal or plastic plugs.
Contact plating: silver, tin-bismuth.
Connecting wires to contact shank by soldering.
RSHAV connectors are manufactured in UHL or V climatic version according to GOST 15150-69.