SP5-35A 1W 4.7K Adjusting
resistors SP5-35 with high electrical resolution for surface mounting.
Cylindrical, single, single-turn with circular movement of the movable system.
The design of the resistors is built according to a coarse-current scheme, it has two resistive elements, while the moving systems are controlled from one shaft.
When adjusting the resistance, the movable system of the fine resistive element is first rotated from stop to stop, and then the movable system of the coarse resistive element is rotated.
Depending on the design of the leads, they are produced in two versions:
– SP5-35A leads on the side of the resistor;
– SP5-35B leads from the end of the resistor.
Are intended for work in chains of direct, alternating and pulsating currents.
Electrical resolution: 0.02% (68…1500 Ohm) and 0.01% (over 1.5 kOhm).
Intermediate values of nominal resistances correspond to the E6 series with a tolerance of ±10%.
Manufactured for temperate and cold climates [UHL].
Functional characteristic – linear A.
Specifications: ОЖ0.468.529 TU.
مقاومت متغیر روسی 4.7کیلواهم СП5-35А 4.7КОМ
برای قیمت تماس بگیرید
Main technical parameters of SP5-35A resistors:
– Nominal resistance range …….. 62 Ohm… 22 kOhm;
– Rated power …….. 1.0 W;
– Maximum operating voltage …….. 130 V;
– Permissible resistance deviations …….. ±10%;
– Wear resistance, not less than …….. 5000 cycles;
– Relative air humidity at +35 °C …….. 98%;
– Ambient temperature …….. -60… +70 °С;
– Minimum operating time, not less than …….. 25000 hours;
– Shelf life, not less than …….. 15 years;
– Resistor weight, no more …… 25 g
جهت اطلاع از موجودی و قیمت تماس بگیرید.