کانکتور روسی ماده فلنج کامل 35 پین قطر 55 میلی متر

ШР55П35ЭГ3Н connector is a 35-pin non-hermetic device socket of the ShR series without a branch pipe for a shielded cable. The socket has a passage diameter of 60 mm. Provides connection of 35 contacts: 33 contacts – Ø1.5 mm, 2 contacts – Ø3.5 mm, with a working current load per contact up to 20 A and 40 A, respectively, and up to 344 A per connector as a whole at AC and DC voltages up to 850 V. ShR55P35EG3 connector belongs to the group of cylindrical low-frequency low-voltage connectors. Case parts are made of aluminum alloy AL-11. The material of the insulators is the press material Carbolite K-211-3. Sockets of contacts of the ShR socket are cylindrical, the material is brass LS59-1. If there is a letter “H” at the end of the connector marking, the contact coating is nickel, in the absence of a letter, the coating is silver. Mounting method hinged (volumetric). The joint of the connector is threaded, and the polarization of the body is single-key. The cable parts of the connectors do not mate with each other, as well as the instrument ones. The maximum allowable number of resolders is no more than 3. There may be slight discrepancies between the letters at the end of the markings applied to the connectors. This is due to the unification of the production of connectors: some parts of the connector housings can be rearranged from one part to another. It is possible to supply a complete analog of the ShR55P35EG3 socket instrument socket. When using, installing, and operating connectors, one should rely on the norms and requirements specified in the following technical standards: OST V 11 0121-91 or GEO.364.107TU