(ШР32П12НГ1) cable plug with a straight branch pipe and a nut for an unshielded cable
SHR32P12NG1 low-frequency cylindrical volumetric mounting threaded joint of normal dimensions.
Designed for operation in electrical circuits of direct and alternating currents with a frequency of up to 3 MHz at a voltage of up to 850 V (peak value).
It is used to connect and disconnect electrical circuits (wires, cables, assemblies and blocks) in electrical and radio equipment.
ШР connectors consist of two parts: a plug and a socket.
Plugs and sockets can be both instrumental (block) and cable.
The instrument part of the connector is made without a branch pipe, with a straight or angled branch pipe, the cable part – with a straight or angled branch pipe.
The joint of the connectors is threaded, and the polarization of the bodies is single-key.
Contact plating – silver, nickel.
Mounting method – soldering.
Connectors are designed for installation with shielded or unshielded cables (wires) according to the type of end nut of the branch pipe.
Are made for internal installation in a climatic modification of UHL2 in accordance with GOST 15150-69.
It is allowed to use connectors for outdoor mounting provided that they are protected from direct exposure to rain, dynamic dust, and solar radiation
Total number of contacts: 12
Maximum current per single contact, A: 20….200
Maximum current load on the connector, A: 20….675
Contact resistance, no more than, MΩ:
– contact diameter, 1.5 mm……….2.5
– contact diameter, 2.5 mm……….1
– contact diameter, 3.5 mm………..0.75
– contact diameter, 5.5 mm………..0.3
– contact diameter, 9.0 mm………..0.15
Maximum operating voltage, V: 850
Insulation resistance in normal climatic conditions, not less than, MOhm: 5000
Sinusoidal vibration, frequency range, Hz: 1….5000
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.