ONTS-RG-09-50/42-R1 (ОНЦ РГ-09-50/42-P1) small-sized cylindrical low-frequency connector with threaded fixation of the articulated position.
Designed for operation in electrical circuits of direct and alternating currents with a frequency of up to 3 MHz at a voltage of up to 500 V.
It is used to connect and disconnect electrical circuits in units and blocks of general-purpose electronic equipment.
ОНЦ РГ-09 connectors consist of two leaky parts: a plug and a socket, which can be either block (instrument) or cable.
The block part of the connectors is made without spigots or with straight spigots, the cable part is without spigots, with straight or angled spigots.
The joint of the connector is threaded, and the polarization of the bodies is single-key.
The connectors are designed for installation with shielded or unshielded cables (wires), while changing the appearance of the end nut of the branch pipe.
Connecting wires to contact shank by soldering.
Contact plating – nickel.
Part of the ONTS-RG-09 connectors has a common layout of contacts with 2RMT connectors, the other part with 2RMDT connectors.
Connectors are made for internal installation in UHL climatic version.
Technical parameters of connectors ONTS-RG-09:
Total number of contacts: ………4, 7, 10, 19, 24, 32, 45, 50
Contact resistance, no more than, MΩ:
– contact diameter 1.0 mm………….50
– contact diameter 1.5 mm………….30
Maximum current load per single contact, A:……….. 5to10
Maximum operating voltage, V: …….500
Insulation resistance in normal climatic conditions, not less than, MOhm: ………5000
Sinusoidal vibration, frequency range, Hz:……… 1 to 5000
Ambient operating temperature, °C:…………. -60 to +70
نقد و بررسیها
هنوز بررسیای ثبت نشده است.