2РТ16П2НШ5-А cable socket with a straight spigot and nut for unshielded cable
Connector 2РТ16П2НШ5-А is a heat-resistant low-frequency cylindrical connector with a threaded fixation of the articulated position.
It is intended for work in electric chains of direct and alternating currents with a frequency up to 3 MHz.
They are used to connect and disconnect electrical circuits by articulating and dismembering in nodes and blocks of electrical and radio equipment.
Connectors 2PT-A consist of two parts: plug and socket.
Plugs and sockets can be both block (instrument) and cable.
The block part of the connector is made without a spigot, with a straight or angled spigot, the cable part – with a straight or angled spigot.
The joint of the connectors is threaded, the polarization of the bodies is single-key.
Contact plating – silver, nickel.
Connecting wires to the contact shank – by soldering.
Connectors 2PT-A are designed for installation with shielded or unshielded cables (wires) according to the type of end nut of the branch pipe.
Manufactured for indoor and outdoor installation in UHL climatic design in accordance with the technical specifications OST V 110121-91, GE0.364.118TU, bR0.364.032TU.
2PT – connector type;
16 – conditional size of the body;
П – design: for instrumentation: П – without branch pipe; ПК – with a straight pipe; СК – with an angular branch pipe; for the cable part: П – with a straight branch pipe; У – with an angular branch pipe;
2 – number of contacts;
H – type of branch pipe nut: Э – for shielded cable; H – for unshielded cable;
Ш – type of contacts: for the instrument part: Г – socket, Ш – plug; for the cable part: Ш – socket, Г – plug;
5 – designation of a combination of contacts (conditional number);
A – additional designation – according to the material of the insulator;
H – nickel coating of contacts;Notes:
1. The type of connector additionally includes the designation of the material “A”.
2. There is no nut in an appliance connector without a spigot. The designation of the nut “E” is conditional.
3. The type of contacts in a cable connector is conditionally designated by the type of contacts in the device connector with which this cable connector mates.
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.