ШР16П1НШ3 cable socket with straight branch pipe and nut for unshielded cable
Designed for operation in electrical circuits of direct and alternating currents with a frequency of up to 3 MHz at a voltage of up to 850 V (peak value).
It is used to connect and disconnect electrical circuits (wires, cables, assemblies and blocks) in electrical and radio equipment.
ШР connectors consist of two parts: a plug and a socket.
Plugs and sockets can be both instrumental (block) and cable.
The instrument part of the connector is made without a branch pipe, with a straight or angled branch pipe, the cable part – with a straight or angled branch pipe.
The joint of the connectors is threaded, the polarization of the bodies is single-key.
Contact plating – silver, nickel.
Mounting method – soldering.
Connectors are designed for installation with shielded or unshielded cables (wires) according to the type of end nut of the branch pipe.
Are made for internal installation in a climatic modification of UHL2 in accordance with GOST 15150-69.
It is allowed to use connectors for outdoor mounting provided that they are protected from direct exposure to rain, dynamic dust, and solar radiation.
They are marked with an alphanumeric code on the case.
ШР connectors are operational when mated with 2PTT connectors according to GE0.364.120TU and 2PT-A connectors according to GE0.364.118TU.
ШР16П1НШ3 socket
ШР – connector type;
16 – conditional size of the body;П – design: for instrumentation: П – without branch pipe; ПК – with a straight pipe; СК – with an angular branch pipe; for the cable part: П – with a straight branch pipe; У – with an angular branch pipe;
H – type of branch pipe nut: Э – for shielded cable; H – for unshielded cable;
Ш – type of contacts: for the instrument part: Г – socket, Ш – plug; for the cable part: Ш – socket, Г – plug;
3 – designation of a combination of contacts (conditional number);
H – nickel coating of contacts;
M – plastic case.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.