шр connectors are designed for installation with shielded or unshielded cables (wires) in electric circuits of direct and alternating (frequency up to 3 MHz) currents at voltages up to 850 V (peak value). шр connectors are designed for indoor and outdoor (when protected by the consumer from dust and water) use in climatic version UHL in accordance with the specifications of NKTSS.434410.504 TU (NKTSS.434410.111 TU).
шр connectors consist of two parts: a plug and a socket. Plugs and sockets can be both block (instrument) and cable. The block part of the ShR is made without a branch pipe, with a straight or angled branch pipe, the cable part – with a straight or angled branch pipe. The joint of the connectors is threaded, the polarization of the bodies is single-key. Contact plating: silver or nickel.
- Number of contacts and their diameter ……2pcs (Ø 2.5 mm)
- Contact resistance, no more …………2 mΩ
- Maximum current load on a single contact, no more…….. 25 A
- Maximum current load total, no more ……..50 A
- connector type leaky,………….. UHL climate control
- Contact material ………….Silver / Nickel
- Insulation resistance in normal climatic conditions,…………. not less than 5000 MΩ
- Peak value of circuit voltage……………… 850V
- Number of articulations – ……………dismemberments 500
- Minimum operating time …………….1000 hours
- Sinusoidal vibration, frequency range………….. 1-5000 Hz
- Increased operating temperature of the medium …………..+60*C
- Reduced operating medium temperature ……………-60*С
نقد و بررسیها
هنوز بررسیای ثبت نشده است.