کانکتور روسی 9 پین قطر48 میلی متر

ШР48П9ЭШ7 connector is a 9-pin non-hermetic device plug of the ШР series without a branch pipe for a shielded cable. The fork has a bore diameter of 52 mm. Provides connection of 9 contacts: 5 contacts – Ø2.5 mm, 4 contacts – Ø5.5 mm with a working current load per contact up to 35 A and 100 A, respectively, and up to 525 A per connector as a whole at AC and DC voltages up to 850 AT. ШР48П9ЭШ7 connector belongs to the group of cylindrical low-frequency low-voltage connectors. Case parts are made of aluminum alloy AL-11. The material of the insulators is the press material Carbolite K-211-3. The contact pins of the ШР plug are cylindrical, the material is brass LS59-1. If there is a letter “H” at the end of the connector marking, the contact coating is nickel, in the absence of a letter, the coating is silver. Mounting method hinged (volumetric). The joint of the connector is threaded, the polarization of the body is single-key. The cable parts of the connectors do not mate with each other, as well as the instrument ones . The maximum allowable number of resoldering is no more than 3. There may be slight discrepancies between the letters at the end of the markings applied to the connectors. This is due to the unification of the production of connectors: some parts of the connector housings can be rearranged from one part to another. It is possible to supply a complete analogue of the ШР48П9ЭШ7 connector – instrument plug. When using, installing and operating connectors, one should rely on the norms and requirements specified in the following technical standards: OST V 11 0121-91 or GEO.364.107TU.